The unique properties of Pebble acrylic make it ideally suited to new or refurbishment for interior vertical surfaces around the home, office or commercial environments. acrylic can be applied with a minimum of preparation over previously finished walls, reducing demolition waste and energy consumption.
Pebble is PMMA (polymethyl methacrylate) polymer which is completely inert and does not release any emissions to the environment. Pebble acrylic is ultra hygienic and does not promote bacterial growth or transmission.
Pebble acrylic consists of Carbon, Hydrogen and Oxygen and is recyclable either by mechanical, chemical or thermal means. Pebble acrylic can be grounded and pelletized for reuse in sheet extrusion or injection molding. If correctly incinerated Pebble acrylic produces only water and carbon dioxide.
Pebble is half the weight of an equivalent glass panel and the therefore uses less energy during transportation and installation.
Pebble will only consume around 10% of the original energy consumption during recycling. In contrast to glass which consumes more than 60% of its original energy consumption during recycling.
Pebble is wholly manufactured under the Environmental Management System which has been independently accredited to ISO14001. The acrylic manufacturing process does not release any harmful emissions to air, land or water.
Additionally, the Pebble manufacturing plant uses a compact footprint and is fully self contained.
Pebble’s unique color layer is achieved without the use of secondary processes or VOC’s. The color and clear layers will not separate under any conditions and are not affected by moisture in any way.
Pebble acrylic can also be chemically reduced to its original monomer for use in other acrylic based products. Pebble acrylic cannot rot and is not susceptible to termite attack.
PEBBLE DECOR - All rights reserved. 1.Pebble expressly disclaims any representation or warranties of any kind, whether express or implied, as to the accuracy, currency , completeness and/or the merchant ability or fitness for a particular purpose of any information contained in or provided via this documentation and/or any service or product described or promoted in this document. 2. It is the customers responsibility to thoroughly examine the product by a qualified person, to determine whether it is suitable for the application it was purchased for.3.Pebble acrylic is for indoor use only and should not be exposed to direct sunlight in any form.4. PEBBLE / REFLECTIONS is a registered trademark.5.Images and colors should be used as guide only 6. Pebble warrants that its products are free from manufacturing defects and they are suitable for use under normal conditions. Product must be inspected prior to installation. In case of any claims, The liability of the company is limited to the cost of the product only. 7.Decorative acrylic sheets are translucent in nature and should be pasted on plain side of calibrated surface. 8.Use suitable adhesive for pasting these sheets 9.The information provided on this sheet represents typical properties and does not constitute a specification. No liability will be accepted for errors and omissions. Pebble also retains the right to change sizes and specifications of the products without prior notice.
Copyright © 2020 (Pebble)- All rights reserved